Pi Zero 2 W Klipper 3D Printer Upgrade, Klipperscreen, Mainsail OS, Crows Nest
$149.99
Skip to product information
Raspberry Pi Zero 2 W3.5" TouchscreenAluminum casemetal belt clipEthernet modExtended range Wifi Mod64 gb SDKlipper firmware upgrade for 3-D printers, Mainsail Web UI, Moonraker API, Klipperscreen interface, Crowsnest remote camerapre-installed.Kali can be installed if needed.
Pi Zero 2 W Klipper 3D Printer Upgrade, Klipperscreen, Mainsail OS, Crows Nest
$149.99
A modded Raspberry Pi Zero 2 W, with a external wifi Long-range antennae, A Ethernet Port, 3.5" touchscreen, LED Fan and camera module. Includes 64GB sd card. The Pi is set up and ready to go, you only neet to connect it into your network via wifi or ethernet. When the screen comes up, click menu, network, and select your network and enter your credentials. When connected, it will show you your IP address of the device on your network. On any other PC, open up a web browser and enter the ip address http:// and it will bring up the Mainsail website this device creates. You can then control your printer from your pc, upload files, and manage prints and not ave to switch SD cards.
With the KlipperPi controlling your 3-D printer, it allows for greater speeds, accuracy, and many more tweaks you can edit to maximize the performance of your 3-D printer. The device itself can be used for other purposes, by simply removing the SD card, put in a new one and install a different OS, Kali Linux, Pwnagotchi, and many more. Download Pi-Imager to see officially supported OS's, or cruise Github for unofficial OS's to install. The Klipper Installation And Update Helper software is installed, and can be used to install themes and other extensions.
With the KlipperPi controlling your 3-D printer, it allows for greater speeds, accuracy, and many more tweaks you can edit to maximize the performance of your 3-D printer. The device itself can be used for other purposes, by simply removing the SD card, put in a new one and install a different OS, Kali Linux, Pwnagotchi, and many more. Download Pi-Imager to see officially supported OS's, or cruise Github for unofficial OS's to install. The Klipper Installation And Update Helper software is installed, and can be used to install themes and other extensions.
Klipper is an open-source firmware for 3D printers that offloads complex calculations to a more powerful external computer (like a Raspberry Pi) while the printer's small microcontroller handles basic tasks, enabling significantly faster speeds, higher quality prints, and advanced features like Input Shaping (vibration reduction) and Pressure Advance (smoother extrusion). It replaces standard firmware (like Marlin), offering powerful web interfaces (Mainsail, Fluidd) for configuration and remote control, allowing users to push hardware beyond typical limits.
.
KlipperScreen is a touchscreen GUI that interfaces with Klipper via Moonraker. It allows you to switch between multiple printers and access them from a single location. Notably, it doesn't need to run on the same host as your printer; you can install it on another device and configure the IP address to connect to the printer.