{"product_id":"pi-zero-2-w-klipperscreen-mainsail-3-d-printer-upgrade-touchscreen-ethernet-and-long-range-wifi-mods","title":"Pi Zero 2 W Klipperscreen\/Mainsail 3-D Printer Upgrade, Touchscreen, Ethernet and Long Range WiFi Mods","description":"\u003cpre\u003e**Klipper · Mainsail · Moonraker · KlipperScreen · Crowsnest — all pre-installed, pre-configured, and tested.**\n\n## What It Does\n\nThe SC-KlipperScreen gives your Klipper printer a full touchscreen control interface. From the 3.5\" display you can:\n\n- **Start, pause, stop, or resume any print** — tap the file, tap print, done\n- **Monitor hotend and bed temperatures** in real time with live set-point targets — tap to adjust without opening a browser\n- **Watch print progress** — filename, elapsed time, ETA, layer counter, and a progress bar, all at a glance\n- **Control motion** — home all axes, set Z-offset, adjust fan speed, flow rate, and print speed multipliers directly on screen\n- **Run G-code macros** — START_PRINT, END_PRINT, CANCEL_PRINT, bed mesh leveling, and any custom macros you've defined\n- **Emergency stop** — large red button accessible from every screen, always within reach\n- **Manage your printer** from the full Mainsail web interface on any browser connected to the same network — the SC-KlipperScreen runs Mainsail as its web UI simultaneously\n\n---\n\n## The Full Software Stack\n\nEvery component is installed, configured to work together, and running on first boot:\n\n**Klipper (v0.13+)** is the firmware that runs on your printer's MCU — the high-performance motion planning engine. The SC-KlipperScreen hosts Klipper on the Pi side and communicates with your printer board over USB serial.\n\n**Moonraker (v0.9+)** is the API server that sits between Klipper and the frontend applications. It handles all communication between KlipperScreen, Mainsail, and Klipper itself. Port 7125.\n\n**Mainsail (v2.16+)** is the full browser-based Klipper frontend. Open any browser on your network, navigate to your printer's IP address, and you have the complete Mainsail interface — G-code file manager, config editor, update manager, webcam viewer, history, and more.\n\n**KlipperScreen (v0.4+)** is the touchscreen UI that runs on the 3.5\" display. It shows temperatures, print progress, control buttons, and navigation menus — all touch-driven, no mouse or keyboard needed.\n\n**Crowsnest (v0.1+)** is the camera streaming service. Add a USB webcam or Raspberry Pi CSI camera, configure the camera path, restart, and you have a live MJPEG or HLS stream accessible in Mainsail or any browser. The SC-KlipperScreen has the full Crowsnest stack ready — you just connect the camera.\n\n**KIAUH** (Klipper Installation and Update Helper) is pre-installed for managing updates via command line if needed.\n\n---\n|\n\n---\n\n## What's in the Box\n\n- ✅ SC-KlipperScreen unit (3.5\" TFT display + Raspberry Pi Zero 2W, fully assembled)\n- ✅ 32GB MicroSD card (Class 10, pre-loaded with complete system image)\n- ✅ USB power cable (Micro-USB)\n\n\n## Compatible Printers\n\nThe SC-KlipperScreen works with any Klipper-compatible printer. Tested or commonly configured machines include:\n\n**Voron:** V0.1 \/ V0.2 · V1.8 · V2.4 · Trident · Switchwire · Legacy\n**Creality:** Ender 3 \/ 3 Pro \/ 3 V2 \/ 3 S1 · Ender 5 \/ 5 Pro · CR-10 \/ CR-10S \/ CR-10 Max\n**Bambu Lab:** Compatible with Klipper mod (advanced — requires X1 hack or external board)\n**RatRig:** V-Core 3 \/ V-Minion\n**Annex \/ Salad Fork \/ Micron:** Fully Klipper-native\n**Prusa:** MK3S \/ MK4 with Klipper conversion\n**Any printer with a supported MCU board** — STM32, RP2040, AVR, LPC1768\/1769, SAMD, and more\n\n*Every printer requires its own specific `printer.cfg`. Spiritual Creations provides a sample config and documentation links — the community Klipper config repository has examples for nearly every printer model.*\n\n## ⚠️ Important Before You Buy\n\nThis unit ships with a **sample printer.cfg**. Klipper will report an \"MCU not connected\" error on first boot until you upload a config matched to your specific printer board. This is normal and expected — it is not a defect. The included booklet walks you through the configuration process step by step.\n\nIf you are new to Klipper, budget time to learn the configuration system. It is well-documented, the community is large and helpful, and the result — precise, fast, highly configurable 3D printing — is worth every minute of setup.\n\n---\n\n*Spiritual Creations Emergency Equipment | Always Be Prepared | Made in the USA*\u003c\/pre\u003e","brand":"Spiritual Creations 42","offers":[{"title":"Default Title","offer_id":55595077140553,"sku":null,"price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0972\/0443\/7065\/files\/Klipperscreen.png?v=1774542739","url":"https:\/\/spiritualcreations2024.org\/products\/pi-zero-2-w-klipperscreen-mainsail-3-d-printer-upgrade-touchscreen-ethernet-and-long-range-wifi-mods","provider":"Spiritual Creations 42","version":"1.0","type":"link"}